If there’s an award for the cheapest way to transform a bike it has to go to these offset bushings. Depending on your exact set up (because M6 bolts allow more room for manoeuvre than M8 ones), you should be able to achieve a minimum of a one degree head angle change and half an inch bottom bracket drop. If you’ve already got a super low bottom bracket then an AngleSet might be a better option, plus you need to check that your frame has adequate clearance, but if it has then a set of these could be the answer to your geometry prayers.

Seeing as you can run either one or two, and with different amounts of offset, there’s also loads of scope for experimentation. Each bushing is made from super hard 6082 T6 aluminium and is finished to the highest spec to fit any bike you want. In fact if you want anything custom made for your bike give Kevin at Steamer a bell because he’ll almost certainly be able to sort you out.

Price: 20 Euros Each

Steamer Industries 00353 851 331 104

www.steamer-industries.blogspot.com