Share

Technical & Maintenance - Page 2

Technical & Maintenance

How To: Service A Headset

Ever wondered how to service and adjust your headset? If so, here's how...

How To: Service A Headset
Technical & Maintenance

Tattoo Dave: Builder, Richmond, Surrey

Surrey’s finest, Tattoo Dave – hard labour and love building some of the finest beads in and around the M25...

Tattoo Dave: Builder, Richmond, Surrey
Technical & Maintenance

How to service your Hope Pro 2 rear hub

The ever helpful folk at Hope have produced some insightful “How to…” video tutorials to assist you in servicing your Hope products. This one guides you...

How to service your Hope Pro 2 rear hub
Technical & Maintenance

Prepare your bike for winter

A guide on how to prepare your bike for winter and all it will throw at you...

Prepare your bike for winter
Technical & Maintenance

UPPERS AND DOWNERS - SEAT POSTS | HAND IN GLOVE

As my friends all acquired these seat posts that shot up and glided down on request, I was left behind, the sad loner in the...

UPPERS AND DOWNERS - SEAT POSTS | HAND IN GLOVE
Technical & Maintenance

Choosing Mountainbike Tyres

With such a vast choice of tyres out there, it's no wonder that so many questions start 'What tyres for...'

Choosing Mountainbike Tyres
Technical & Maintenance

How To: True A Wheel

Truing a wheel isn’t the easiest thing to explain, but hopefully after watching this video you’ll realise that the act itself isn’t as tricky as...

How To: True A Wheel
Technical & Maintenance

Bicycle Base Tunes | More Than A Supporting Role

A look into bicycle base tunes with Sram’s Torben Borrowy...

Bicycle Base Tunes | More Than A Supporting Role
Technical & Maintenance

Handmade Bikes | The Art Is Far From Dead

We seem to be witnessing a resurgence in the once dying art of handmade bike building...

Handmade Bikes | The Art Is Far From Dead
Technical & Maintenance

Renthal Lock-On Grips | From Proto To Production

Sandy Plenty discusses the important role of rider input and the ‘process’ in the development of products...

Renthal Lock-On Grips | From Proto To Production
Technical & Maintenance

How To: Change a Cassette

This tech video might be a bit too simple for some of you, but it seems like there’s still a load of riders who haven’t...

How To: Change a Cassette
Technical & Maintenance

How Things Work: The Freehub Body - Part 2

A load of you also wanted to know what goes on inside Hadley and Mavic rear hubs, and now you need wonder no more… http://mpora.com/videos/wDqYlDA8K Hopefully that...

How Things Work: The Freehub Body - Part 2
Technical & Maintenance

Epic bleed solutions-brake bleeding kit

Dirt blogger, Ace, finds a cheap solution to bleed your brakes which is bleeding useful. Words and Photos: Ace Woodley I have some 2007 Juicy 3 brakes,...

Epic bleed solutions-brake bleeding kit
Technical & Maintenance

How Things Work: The Freehub Body

http://mpora.com/videos/r6SP2DtVL If you’ve ever wondered what goes on inside your rear hub then check out this in depth feature… The Freehub Body – how it works Hopefully...

How Things Work: The Freehub Body
Technical & Maintenance

Seven mountainbike maintenance secrets

We aske owner of a company specialising in lubes and maintenance products to share some advice for on mountainbike maintenance...

Seven mountainbike maintenance secrets
Technical & Maintenance

Chain Lube - Wet or Dry?

Which chain lube does a better job: wet or dry lube?

Chain Lube - Wet or Dry?
Technical & Maintenance

How to build a wooden ramp. Update

A complete set of instructions showing you how to build your very own wooden jump. I wrote this for Dirt Magazine back in February 2008 (issue...

How to build a wooden ramp. Update
Technical & Maintenance

29" Wheeled Bikes...discuss

After the success of our recent ‘The Bicycle as a Fashion Accessory’ discussion feature (!!!), what do you all think of 29″ wheeled bikes? It seems...

29" Wheeled Bikes...discuss
Technical & Maintenance

How To Make a DIY Cable Cam

Ever wanted to make your own cable cam? Hannah Taylor sent over this “How To” guide to make your own cam mount from readily available...

How To Make a DIY Cable Cam
Technical & Maintenance

How to build a steel hardtail in 6 minutes

An amazing look at the detail and effort needed to create a custom made steel hardtail. Sean Walling owner of Soulcraft shows us how it’s done...

How to build a steel hardtail in 6 minutes
Technical & Maintenance

Fork Tuning

In the last couple years I have done a fair bit of helmet cam-ing for Bjorn Enga in his Kranked movies. When filming Kranked...

Fork Tuning
Technical & Maintenance

How not to remove a seat post

I think this is a common problem. Steel frame, aluminium seatpost. One stuck fast inside the other. Is it something to do with an electrolytical...

How not to remove a seat post
Technical & Maintenance

Replacing Your Shifters

A step-by-step guide to replacing your shifters...

Replacing Your Shifters
Technical & Maintenance

Maintaining Your Air Shock

A step-by-step guide to maintaining your air shock...

Maintaining Your Air Shock
Newsletter Terms & Conditions

Please enter your email so we can keep you updated with news, features and the latest offers. If you are not interested you can unsubscribe at any time. We will never sell your data and you'll only get messages from us and our partners whose products and services we think you'll enjoy.

Read our full Privacy Policy as well as Terms & Conditions.

production